![\"\"](\"https:\/\/i0.wp.com\/www.billdugan.com\/scout\/wp-content\/uploads\/2020\/09\/IMG_0056.jpg?resize=1024%2C768\")
<\/p>\nI took advantage of a lazy Sunday afternoon to pull one of my two spare windshields out of the garage and throw it on some sawhorses. I’ve been hesitating on really digging in to the paint on the Scout until I get a firm date and commitment from my neighbor’s dad, so I thought I’d start on a windshield as a testing ground for new tools and my metal shaping skills until I can pin him down.<\/p>\n
The tan windshield is the first one I bought, waaaaay back when I had Chewbacca, and I’ve been dragging it around with me ever since then. It came to me with no glass and a fair bit of rust, but the main panels weren’t in bad shape. I’d done some very light sanding years ago but stopped before I went farther than I was comfortable with. Today I put the flap wheel on an angle grinder, plugged into a podcast, and went to town on it.<\/p>\n
<\/p>\n
The bottom edge is in much worse shape than the top, which I’d expect on any used windshield. Water collects inside the rubber gasket and eats away at the paint. There’s also rust on the bottom edges of the cowl where it sits on the top of the fender.<\/p>\n
![\"\"](\"https:\/\/i0.wp.com\/www.billdugan.com\/scout\/wp-content\/uploads\/2020\/09\/IMG_0057.jpg?resize=1024%2C768\")
<\/p>\n
I went all the way around the edge of the windshield opening and cleaned both inside and out, and exposed as much of the bad metal as possible. Then I cleaned every other place I saw rust and was able to get about 90% of what I saw.<\/p>\n
![\"\"](\"https:\/\/i0.wp.com\/www.billdugan.com\/scout\/wp-content\/uploads\/2020\/09\/IMG_0061.jpg?resize=1024%2C768\")
<\/p>\n
There are sections near the mounting bolts that I can’t get without a sandblaster, so that will probably be next on the list of tools to be purchased.<\/p>\n
![\"\"](\"https:\/\/i0.wp.com\/www.billdugan.com\/scout\/wp-content\/uploads\/2020\/09\/IMG_0075.jpg?resize=1024%2C768\")
<\/p>\n
I covered everything visible with etching primer to keep it from flash rusting, and dragged windshield 2 out of the corner. This one came to me about 8 years ago, and it came with glass included.<\/p>\n
![\"\"](\"https:\/\/i0.wp.com\/www.billdugan.com\/scout\/wp-content\/uploads\/2020\/09\/IMG_0088.jpg?resize=1024%2C768\")
<\/p>\n
On the surface it’s in better shape than the tan unit, but when you start looking closer, it gets ugly. A utility knife made short work of the windshield \u00c2\u00a0gasket, and once I’d made my way through that, the glass popped right out.<\/p>\n
![\"\"](\"https:\/\/i0.wp.com\/www.billdugan.com\/scout\/wp-content\/uploads\/2020\/09\/IMG_0084.jpg?resize=1024%2C768\")
<\/p>\n
Both of the cowl edges are crispy.<\/p>\n
![\"\"](\"https:\/\/i0.wp.com\/www.billdugan.com\/scout\/wp-content\/uploads\/2020\/09\/IMG_0078.jpg?resize=1024%2C768\")
<\/p>\n
When I move them both around, I hear the sound of rust and metal rattling around inside, so I know they’re both crispy inside as well; I’ve got a can of Eastwood Chassis encapsulator on deck for them both but I want to do some more investigation to see if I can access all of the interior through the holes I see.<\/p>\n
So, next on the to-do list is to figure out what steel thickness I need for patch panels, summon my courage, and break out the cutting wheel on the tan windshield.<\/p>\n","protected":false},"excerpt":{"rendered":"
I took advantage of a lazy Sunday afternoon to pull one of my two spare windshields out of the garage and throw it on some sawhorses. I’ve been hesitating on really digging in to the paint on the Scout until I get a firm date and commitment from my neighbor’s dad, so I thought I’d […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":""},"categories":[27],"tags":[],"class_list":["post-2511","post","type-post","status-publish","format-standard","hentry","category-repairs"],"jetpack_featured_media_url":"","jetpack_shortlink":"https:\/\/wp.me\/p58Ac2-Ev","jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/www.billdugan.com\/scout\/wp-json\/wp\/v2\/posts\/2511","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.billdugan.com\/scout\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.billdugan.com\/scout\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.billdugan.com\/scout\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.billdugan.com\/scout\/wp-json\/wp\/v2\/comments?post=2511"}],"version-history":[{"count":5,"href":"https:\/\/www.billdugan.com\/scout\/wp-json\/wp\/v2\/posts\/2511\/revisions"}],"predecessor-version":[{"id":2534,"href":"https:\/\/www.billdugan.com\/scout\/wp-json\/wp\/v2\/posts\/2511\/revisions\/2534"}],"wp:attachment":[{"href":"https:\/\/www.billdugan.com\/scout\/wp-json\/wp\/v2\/media?parent=2511"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.billdugan.com\/scout\/wp-json\/wp\/v2\/categories?post=2511"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.billdugan.com\/scout\/wp-json\/wp\/v2\/tags?post=2511"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}