{"id":2852,"date":"2021-08-23T06:55:30","date_gmt":"2021-08-23T14:55:30","guid":{"rendered":"http:\/\/www.billdugan.com\/scout\/?p=2852"},"modified":"2021-08-23T06:55:30","modified_gmt":"2021-08-23T14:55:30","slug":"little-things-2","status":"publish","type":"post","link":"https:\/\/www.billdugan.com\/scout\/2021\/08\/23\/little-things-2\/","title":{"rendered":"Little Things"},"content":{"rendered":"

I got back from Nationals with shitty front brakes, a leaky gas tank, and a bunch of new parts to play with. First, I made a couple of calls and got brake work under control.<\/p>\n

The gas vent line was probably the easiest win, so I sourced a brass barb fitting from Lowe’s and 4′ of 3\/8″ gas line from NAPA with a new plastic filter. Swapping out the brass plug for the barb was easy, and the gas line went on quickly. I brought the line up into the driver’s rear fender, gaining access through the cover behind the spare tire, and lopped off about 1′ of the hose. Capping that with the filter, I zip-tied it to the other vent hose to keep it upright and buttoned everything up. Hopefully the tank will vent a bit smoother now, at least until I can sort out the larger issue with the sender.<\/p>\n

\"\"<\/p>\n

At Nats, Brian and I brainstormed a way to add snap barrels to the back of the tailgate so that I can snap the back of the soft top closed, and after I sourced the small hardware (6\/32″ stainless screws and nylock nuts) I drilled into the aftermarket aluminum diamond plate. There’s a divot in the top of the tailgate that the nuts tuck into neatly without touching the sheet metal; it wasn’t until Brian pointed that out that I realized the solution was that simple. D’oh!<\/em> (Now I have to get the zippers fixed).<\/p>\n

That left the windshield wiper issue as the next big problem, which I was not looking forward to diagnosing. I also needed to re-align the wiper arms on the windshield, and a little research revealed they are simple to remove and easy to reinstall<\/a>. Taking the cowl cover off confirmed my suspicion that the linkage from the motor to the wiper arm had come loose\u2014this has happened before.<\/p>\n

A trip to the Ace Hardware provided a quintet of e-clips in the right size, and I pulled the motor out completely to reattach the arm. Years ago I’d pulled it out and was never able to get it back in completely<\/a>, so this time I focused on figuring out the secret trick of tucking the end of the bracket around the mount under the cowl. It’s now snugged tight with two bolts in the correct position. Then I had to fight to re-attach the first arm to the second linkage, which is always<\/em> a treat.<\/p>\n

With that done, I started diagnosing the wipers themselves; there is no response in the motor when I turn the switch at all. I have a 12-volt bench tester, so while the motor was out I confirmed that it’s not smoked; it revolved freely. A voltage tester hooked to the ground wire shows there’s no power coming through from the switch on the dash, so now I’m trying to pull the switch out and source a replacement.<\/p>\n

\"\"<\/p>\n

While I was out on errands I stopped at the Harbor Freight to pick up a cheap stepped drill bit that went wider than 1″ diameter. The new glove box lockset from Binder Boneyard<\/a> is a plastic barrel that’s much wider than the stock metal unit, so I had to open up the factory hole and grind off the two threaded studs on the backside of the glove box door. (Fun fact:<\/em> I realized I have four spare glovebox doors when I went looking for another part in my bins).<\/p>\n

\"\"<\/p>\n

This took all of about 15 minutes. Then I had to adjust the crappy metal tab I’d made to replace the catch on the inside of the glove box; apparently my dash is from a particularly boozy Friday shift in Fort Wayne, and does not feature the same loop catch found in all<\/em> of the other Scout II’s I’ve ever seen or parted out. Once that was done and I had it fastened in the right place, the door closes snug to the dashboard and now features a lock! I’d like it a little more if it was made out of metal but for the price it can’t be beat, and anything that’s truly valuable is going to get locked into the Tuffy console or the ammo box in back anyway.<\/p>\n

\"\"<\/p>\n

The final thing I did was to drill a single hole in the grille for my new (used) INTERNATIONAL badge, add some good 3M double-sided auto tape, and mount it to the sheetmetal in the proper position. She looks like a whole new truck!<\/p>\n

\"\"<\/p>\n","protected":false},"excerpt":{"rendered":"

I got back from Nationals with shitty front brakes, a leaky gas tank, and a bunch of new parts to play with. First, I made a couple of calls and got brake work under control. The gas vent line was probably the easiest win, so I sourced a brass barb fitting from Lowe’s and 4′ […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":""},"categories":[27],"tags":[],"class_list":["post-2852","post","type-post","status-publish","format-standard","hentry","category-repairs"],"jetpack_featured_media_url":"","jetpack_shortlink":"https:\/\/wp.me\/p58Ac2-K0","jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/www.billdugan.com\/scout\/wp-json\/wp\/v2\/posts\/2852","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.billdugan.com\/scout\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.billdugan.com\/scout\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.billdugan.com\/scout\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.billdugan.com\/scout\/wp-json\/wp\/v2\/comments?post=2852"}],"version-history":[{"count":5,"href":"https:\/\/www.billdugan.com\/scout\/wp-json\/wp\/v2\/posts\/2852\/revisions"}],"predecessor-version":[{"id":2861,"href":"https:\/\/www.billdugan.com\/scout\/wp-json\/wp\/v2\/posts\/2852\/revisions\/2861"}],"wp:attachment":[{"href":"https:\/\/www.billdugan.com\/scout\/wp-json\/wp\/v2\/media?parent=2852"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.billdugan.com\/scout\/wp-json\/wp\/v2\/categories?post=2852"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.billdugan.com\/scout\/wp-json\/wp\/v2\/tags?post=2852"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}