![\"\"](\"https:\/\/i0.wp.com\/www.billdugan.com\/scout\/wp-content\/uploads\/2022\/02\/Heater-Core-1.jpg?resize=1024%2C768\")
<\/p>\n<\/p>\n
So after some long months of dead ends, I’ve finally got a good heater core sitting on the bench in the basement. After some judicious use of PBBlaster I pulled all of the screws out and disassembled the main elements. There isn’t much to it, honestly; two access covers hold the heater element in place, and the blower motor assembly is held in with four screws. I brought the box outside and sprayed some paint stripper on it, but I found that didn’t work very well. I switched over to an angle grinder with a stripping wheel and got as much of the paint off of the main sections as possible, but there are a lot of small crevices and angles I can’t reach, as well as the entire interior of the box. So I’m going to switch over to the sandblaster.<\/p>\n
![\"\"](\"https:\/\/i0.wp.com\/www.billdugan.com\/scout\/wp-content\/uploads\/2022\/02\/Blast-Cabinet.jpg?resize=1024%2C768\")
<\/p>\n
Which brings me to the blast cabinet. When I got it from Brian, I knew it would need help. The viewing glass was pitted and cloudy, the gloves were in tatters, and it had no stand. I measured the glass, had a new piece cut at the hardware store last weekend, and put it in on Sunday afternoon. Laying in bed last night I brainstormed a new wooden stand design with some storage below for all of the sandblasting gear\u2014the tanks, media, and other stuff. It’ll be on wheels so that I can move it around the garage easily, and having all of that stuff within a smaller footprint will help with the storage crunch in the garage.<\/p>\n
So I’ll get that built this weekend and maybe I can get some time before the Super Bowl to actually clean out the heater box and get it ready for paint.<\/p>\n
But on Saturday I’m headed back up to York to pick up the NOS fender for my friend Mike, who saw my post on Instagram and mentioned he was interested in it. I’m going to use the opportunity to pick up the black bench seat I mentioned earlier and set that aside for installation in the spring.<\/p>\n","protected":false},"excerpt":{"rendered":"
So after some long months of dead ends, I’ve finally got a good heater core sitting on the bench in the basement. After some judicious use of PBBlaster I pulled all of the screws out and disassembled the main elements. There isn’t much to it, honestly; two access covers hold the heater element in place, […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":""},"categories":[27],"tags":[],"class_list":["post-3062","post","type-post","status-publish","format-standard","hentry","category-repairs"],"jetpack_featured_media_url":"","jetpack_shortlink":"https:\/\/wp.me\/p58Ac2-No","jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/www.billdugan.com\/scout\/wp-json\/wp\/v2\/posts\/3062","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.billdugan.com\/scout\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.billdugan.com\/scout\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.billdugan.com\/scout\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.billdugan.com\/scout\/wp-json\/wp\/v2\/comments?post=3062"}],"version-history":[{"count":1,"href":"https:\/\/www.billdugan.com\/scout\/wp-json\/wp\/v2\/posts\/3062\/revisions"}],"predecessor-version":[{"id":3066,"href":"https:\/\/www.billdugan.com\/scout\/wp-json\/wp\/v2\/posts\/3062\/revisions\/3066"}],"wp:attachment":[{"href":"https:\/\/www.billdugan.com\/scout\/wp-json\/wp\/v2\/media?parent=3062"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.billdugan.com\/scout\/wp-json\/wp\/v2\/categories?post=3062"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.billdugan.com\/scout\/wp-json\/wp\/v2\/tags?post=3062"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}