{"id":4199,"date":"2023-11-06T07:15:48","date_gmt":"2023-11-06T15:15:48","guid":{"rendered":"https:\/\/www.billdugan.com\/scout\/?p=4199"},"modified":"2025-03-17T18:39:54","modified_gmt":"2025-03-18T02:39:54","slug":"weekly-roundup-11-6","status":"publish","type":"post","link":"https:\/\/www.billdugan.com\/scout\/2023\/11\/06\/weekly-roundup-11-6\/","title":{"rendered":"Weekly Roundup, 11.6"},"content":{"rendered":"

I had to run out on errands Sunday morning, and the weather was in the upper 60’s, so I grabbed Finn and we rolled out in the Scout for a fall adventure. Our first stop was down in Pasadena at the Eastwood store, where I needed to pick up some chassis black and a tube of seam sealer. As we wandered the store, my old friend Steven G. walked in, as he was shopping for supplies for his Scout. We caught up for a bit, and talked about getting a fall meetup together, and then I exited the store in a hurry before I was tempted to buy anything else. We stopped at the Home Depot for some other supplies and a precut 2×4′ sheet of plywood and headed home.<\/p>\n

\"\"<\/p>\n

\"\"<\/p>\n

In the driveway, I pulled the original bumper off the mounts and hung it in place to see exactly how well it’ll fit. I think it needs a little more standoff than the original had, but with another 2″ or so it will work perfectly. I think I can make the original mounts work for the short term, and when I can get my hands on some larger longer box steel I’ll fabricate a permanent mount.<\/p>\n

I opened up the rear doors and started brushing on the chassis black over encapsulator, and got a good portion of it done before the sun went down. The chassis paint is a lot thinner than the encapsulator, and tends to make more of a mess. While I was out there, Brian T. stopped by on his way back over the bridge, and we caught up for the first time in a couple of months.<\/p>\n

\"\"<\/p>\n

After closing up the truck and garage, I brought the sheet of plywood in to the basement, turned on the football game, and set it up as a mounting rack for my spare wiring loom. The goal here is to rebuild the wiring loom so that I can pull the old one out and replace it with this. I’d originally contacted Super Scouts to price out a brand new loom, but after several weeks of waiting I was told their wiring specialist is two months behind. So I’ll take advantage of the inside time and learn how to disassemble, test, and rebuild the one I’ve got. One thing I am going to reach out to them about are some replacements for the bulkhead connectors I’ve got, to see if I can get any with intact mounting tabs.<\/p>\n