Workday Prep

I got a bunch of goodies delivered for the Saturday workday: I picked up a fresh battery at the auto parts store, and Rock Auto dropped off a set of spark plug wires and a new ignition lock last night. Amazon delivered points, a condenser, and a carb rebuild kit. The spark plugs should be here sometime next week, which is kind of a bummer.

I also grabbed a new tub for all of the stuff I’ll be collecting as I work on the truck, and a pair of small plastic plugs to hopefully close off the two holes in the roof. The first thing I’ll probably tackle Saturday morning is replacing the ignition lock—provided the one they sent is the right size—and then pre-oiling the cylinders. Hopefully with Bennett’s help we can diagnose and get the rig running; I’ve got pretty much everything we’ll need.

I also got a bunch of helpful advice on the forums about some questions I had. The first big news is that the doors actually do lock—the whole mechanism is cleverly built into the handles. What you do is: get in, close the door, and push the handle down. That locks the door. Then you pull it up to unlock and unlatch the door. It’s a little inconvenient to have to lean in and lock the back doors, but it’s also kind of cool to not have visible locks. I also found instructions to get the doorhandles off: you basically pull the escutcheon back and push a pin out of the post, freeing up the handle for removal. Now I can pull all four door cards off and see what the door interiors and glass scissors look like.

Somebody also mentioned that my rear door latch was probably flipped, which would be the reason why it won’t latch, so I pulled it out of the door and looked it over. It’s not engineered the same way the tailgate latch on the Scout is (which lends itself to being spun internally, like overwinding a watch); it looks pretty much impossible to spin further than it’s supposed to go. So I replaced it and moved the latching post on the door outward as much as I could—and that did the trick. So now the rear barn doors close properly. I’ve got to pull one of the door handles off and figure out what lock barrels I need to replace all three locks on the same key.

Meanwhile the IH fridge in the garage is stocked with beer; I’ve got the engine resurrection toolkit collected on the workbench downstairs, and I have to put the new battery on the conditioner overnight. The boys should be arriving sometime around 9AM tomorrow, for which I’ll have warm coffee and donuts. I can’t wait to play with trucks!