We were busy with lots of fun Christmas activities this weekend so my opportunities to work on the truck were limited, but I hit a big milestone Sunday evening. First, I’ll mention the delivery of a brand-new welder from Eastwood, which I was finally able to unbox and use on Saturday evening as the sun was setting. With that, I was able to weld the filler hose bracket onto the front firewall, a captive nut on the bottom of the rocker to mount the fuel tank, and a captive nut on the passenger kick panel to mount the fender skirt properly. After that I found that the fuel hose I’d bought from Amazon—after waiting three weeks for Summit to send me a notification that wouldn’t be able to ship one until 12/28—was 1/2″ too big. I have no idea how I messed that up, but the correct size is on the way.
Returning to the bench seats, I’d started the upright to the rear bench last week but stalled at the corners, as they didn’t resemble the one on the spare ’68 bench I have for reference. But when I returned to the seat portion and realized I had to tuck the fabric behind the metal hinge mounts instead of covering them, I understood how to finish both seats off and how the pattern worked. It took some work but I got the upright 98% finished (I think I might have to try to sew one seam up by hand). Then I consulted a reference photo and connected both seats with refurbished bars and mounted the seat in the truck. I really like the way this looks and I’m excited to get the front seat started.