Nationals 2025 Recap

I’m back at my desk on Monday after a 1000-mile trip out and back to Ohio, with only a minor hiccup the whole way. Overall, it was a great time, and even though the weather was damp and drizzly, the trip was filled with fun and good friends.

We changed up our strategy a little bit this year and got on the road Wednesday evening right after work in order to make it to an overnight at a cheap hotel near Pittsburgh, about halfway to Ohio. At our first pit stop Bennett found that his lower radiator hose was spitting all over the engine bay, but he produced a spare from all the parts in his cargo area. We went inside and had a good dinner before coming back out when the engine had cooled down, and had it swapped out in about a half an hour.

Refilling and burping the tank, we got on the road as the sun was setting and continued into Pennsylvania with our lights on. Brian found a hotel that wasn’t booked, and after Siri took us the long way, we parked outside and shut the trucks down. The room and beds were clean enough that we didn’t mind and 80 bucks was exactly the right price.

After a breakfast of powdered eggs and manufactured bacon, we hit the road at about 8AM on Thursday and continued our way into Ohio. The reason for getting out there early was so that we could finally stop in and see the Air Force Museum, which is in Dayton—only about 20 miles from the hotel we were staying at. It’s been there like a big giant bull’s-eye for years, and we just never made the time to check it out.

Getting out there, the weather was clear but cool and we had mostly sunny skies for the entire trip. We rolled into the Museum parking lot at about noon and were immediately blown away by the size and scope of everything. They’ve got four huge hangars, starting with the birth of aviation and the Wright brothers, who began their tinkering with airplanes not far from the museum. Each successive hangar moved forward in time, all the way up to modern jets. There was so much to see, we didn’t have enough time to get to the last two hangars apart from a quick speed walk. After the museum closed at five, we loaded back up and headed to our hotel—only 7 miles away—to register and start meeting up with people in the parking lot for some cold beer and conversation.

Friday morning is always the best morning for parts hunting, but we got a bit of a late start. The hotel we stay at is very nice and they provide a better breakfast than most. We made it to the fairgrounds at about 9:30, parked the trucks, got set up, and then hit the stands to see what we could find.

My list for this year was actually very short. I wasn’t looking for any Scout stuff, and I only had a few specialty Travelall items that I wanted to find. The vendor space seemed a little thin compared to two years ago, but a lot of the used parts guys had a wide selection of Scout stuff. There was barely any C-Series truck stuff to look through, which was kind of disappointing. I stopped at the Scout Connection tent and picked up a glove box insert for Darth Haul, which was one of the top things on my list, and scoped out a couple of other items to look at later. I also had a list for a couple of other folks, and found a six-cylinder air cleaner for Pickup David after digging through a huge pile of assorted parts.

The Friday crowd was a bit smaller than the weekend crowd, which was normal, but we met up with a bunch of old friends and caught up as we walked around. Inside the building, there was an amazing display of beautiful show trucks: 501, the first Scout 80 ever made, lovingly restored by the IH pros for display. Next to that was the last Scout II produced in 1980, a diesel Scout II.

Scout Motors had both of the new prototypes on display with a big crowd around each one. They are beautiful in person, and we spent a lot of time admiring the design and all of the tiny details they added: things like LED lights under the door handles, a trick charging port door behind the driver’s rear side marker, and cupholders on either side of the frunk. The Scout employees were very nice and answered questions all day, pausing to wipe them down with chamois cloths.

Back at the trucks, we sat under the awning and caught up with some of the folks around us. Bennett had made up signs to offer Hanky for sale at Nats, thinking someone might take him up on a deal and he could come home with a pocket full of cash for a future deal. He had a lot of tire kickers, and his price was very fair for what he was asking, but Hanky is sort of like a threadbare suit on a male model—the components are worth more than the shell of the truck.

One of the tech seminars was very interesting: Levi from Old Iron Offroad was doing an introduction to the Holley Sniper kit. I took copious notes and confirmed a lot of things I was already assuming. I’d already figured I would need to buy a beater PC laptop and learn more about tuning in order to get the most out of the Sniper, and this confirmed it. He also gave us a discount code for an EFI training course, and as a surprise, they did a drawing for the Sniper kit they were demoing—which I didn’t win, sadly.

Sean Barber and his crew did a talk on taking their Scout back to Baja to race in the NORRA 1000; last year they had an accident and the truck rolled down a hill, which was the end of the race (and that truck). They built a new one, keeping some of the same components from the first truck, and won first place in their class. Then they walked us out to the truck and fired up the engine so we could hear a 4-cylinder truck engine roar.

As usual, I peeped out all of the C-series trucks and Travelalls to see how their trucks look; they were thin on the ground this year, but this teal truck and a white one with barn doors caught my eye.

And this forlorn D-series Travelall was for sale—with the trailer—and no motor.

Stephen and I walked over to check out this pretty pickup truck, which was similar to the one he used to have.

I’m betting this Terra won for Ugliest Truck, but beauty is in the eye of the beholder, as they say.

Late in the afternoon. I ran into Brian and Emma who I met years ago at the 2021 Nationals, who had trailered in her Scout from Illinois. We made plans to meet up on Saturday to catch up, and they headed off to their hotel.

The three of us packed up at about five and headed out for some dinner at a pizza joint close to the hotel, dodging rain showers along the way. Then we headed back to the hotel and parked up with the rest of the crowd there, cracking open some beers and tailgating until late in the evening.

Saturday morning, the three of us agreed to get up earlier, and I arranged to pick up Brian and Emma, whose Dodge towing rig had broken down the night before. We loaded them into my Scout and made it to the fairgrounds by a little after 8 o’clock. They moved their Scout next to ours, and we reassembled our canopy, then hit the parts field for a second run. There weren’t many new vendors out there, but we found some more good deals and offered some advice, finding them a set of good door hinges buried in the bins at Coonrods’. I picked up a set of dome-style IH hubcaps for Darth that had been painted red; I’ll see if I can strip them and shine them up. For $30 it was too good to pass up. But other than that, I was very disciplined. I did grab a C-series fender for Pickup David for $40; it’s going to need some work but better than anything else he’d find around here.

Saturday’s forecast was much wetter than Friday’s and we dealt with fleeting rain showers off and on the whole day. Bennett adjusted his signs to sell Mr. Hanky and I put more of my postcards out on my wipers. There were more seminars scheduled, but the one everyone was interested in was an update from the Scout Motors team where they talked about everything they’ve accomplished and what’s coming next.

Late in the afternoon, I queued up to do a photo tour of the plant in my truck and a security guard led us into the facility, where IH made their heavy duty trucks. I was able to park my truck on the production line itself and take a bunch of really cool photos there, which was a highlight.

Then we drove back out and parked in our spot. The rain came and went all afternoon, and that seemed to dampen the spirits of some of the people with shiny show trucks, because the field started thinning out at about 3. At this point, I’m not worried about rain while I’m out there so we stuck around until the end. That turned out to be a blessing, because we were part of something very special at the end of the day. As we were pulling out to go to the hotel, our friend Dennis flagged Bennett down and told him that the Scout Motors folks were pulling their trucks out for a photo op. Brian and I parked Peer Pressure and walked back over to watch.

For the photo shoot, they pulled the first scout out of the garage and then the last Scout and flanked the two new Scouts. We watched them align the trucks and take some photos, and it just so happened that Mr. Hanky and Peer Pressure were sitting right behind the new trucks.

Bennett even got involved and wound up steering the First Scout backwards to get it lined up while other people pushed it. Then, the Scout Motors folks asked us to pull our trucks up behind theirs, and we jumped at the chance. Originally, I was in the first row behind their Terra, but it turned out I would have been out of the frame, so they moved me over to the other side in the third row. I wasn’t complaining.

They organized all the trucks and we moved them around until they were happy with the placement, and then we stood behind their photographer to watch them do the photo shoot with a drone and a camera. I used my monopod and the timer on my camera to shoot as many pictures of the set up as I could.

While I was shooting, a couple of the Scout motors folks were standing next to us, and I asked one of them if, when they were done, we could shoot a photo with all of the owners in front of their trucks. Her eyes lit up, she said that’s a great idea! and quickly arranged it with her crew. We all ran to our trucks, and they shot a bunch of pictures and video, and then did one with the Scout Motors crew in front of their two new trucks and all of us.

As we all dispersed, Bennett quietly moseyed over to the garage and disappeared inside for a couple of minutes. He then came out driving the Last Scout, taking it for a spin around the parking lot with a giant grin on his face. It turned out that he had mentioned driving the First Scout to Mike Bolton, who owns the Last Scout. He threw Bennett the keys and told him he’d better take the Last Scout out for a spin so he could say he drove them both. Stuff like that is the reason I love going out there.

At that point, it was 6 o’clock, we were hot and hungry, so we finally left the grounds and hunted down some food at a pub close to the hotel. We then hit the Walmart for some supplies and made our way back to the parking lot, where the auction was just getting started. At this point, I was pretty beat and not feeling as social as I should have been and we only stayed out to talk to folks until about 10 o’clock before heading upstairs.

Sunday morning, we were up and out early. After stopping to take a quick group photo, we made sure everything in the truck was as waterproof as it could be and headed out into the drizzle. I made sure to wash the windshield with ceramic cleaner to wick off the water, but hoped we’d not drive through any major downpours. As it turned out, we did fine even though the clouds were following us eastward. Brian and I switched off driving which made the trip much easier to do in one day.

We stopped off for lunch in a little town in Pennsylvania and happened to find the same family-owned diner Bennett and I ate at two years ago, which was just the right speed.

Both trucks ran flawlessly on the way home, and we pulled into the driveway at about 5:30. Brian got a pitstop, we transferred his gear, and he continued home. I backed a damp Peer Pressure into the garage, got my basic gear out, and let her cool off.  I’ll have to address the leaking exhaust when it dries out, but other than that, she was rock-solid the whole way.