When I bought my first Scout, I was one of the youngest guys at the car meetups. I was 26, gainfully employed, and knew nothing about cars other than what I’d picked up in the repo lot. I knew more about picking locks than I did fixing engines, but I didn’t let that stop me from driving a 20-year-old truck to the Outer Banks from Baltimore with nothing but a screwdriver and some electrical tape. I read as much as I possibly could and picked up bits of information from the old-timers around me. Resources like the Binder Bulletin and the IHC Digest were full of guys who had bought Scouts new off the dealer lots, and they were a wealth of knowledge and information about the little quirks and tricks of ownership.
And as time has moved on, so have a lot of those old-timers. Guys I leaned on in the early years have since passed; interesting characters with names like Doc Stewart and Ol’ Saline have gone to the big garage in the sky, leaving a big empty space where their friendly knowledge once was.
One of Bennett’s friends from his early days collecting trucks passed late last year, leaving behind a huge collection of vehicles at his mother’s house. Finley and I had been up there 15 years ago to help Bennett pull an engine from under a lean-to, and at that point the place had simply been overgrown. Bennett was asked by the family to go up and inventory the stuff left behind, and I volunteered to give him a hand.
After meeting a member of his family and getting our bearings, we checked out a truck in the garage near the house: a Traveler in mostly restored condition, but surrounded by pieces and parts that still needed to be installed. It’s still in great shape, and all of the parts required look to be nearby, but it would require some serious excavation. The garage is stuffed with tools and parts and lawnmowers and other stuff, but it’s still dry and intact, which is good news. We noted what was there and what might be missing, and some wheels started turning in Bennett’s head.
Walking around back, we found another collection of parts that had once been protected by a lean-to and tarps. In this pile were a bunch of doors, hoods, and other sheet metal, as well as a bin full of heavy engine parts. Most of the stuff was open to the elements, so we dug around to try and identify as much as we could, pick it up out of the dirt, and shoot pictures.
Out in the back field, we found that the place was wildly overgrown compared to when we were there earlier: what had been open grassland 25 years ago was now a young forest, and it took us a while to bushwhack our way to the area where he had parked a bunch of cars and trucks: a group of R series Travelalls, R series pickups, a trio of Nash sedans, a couple of Scout IIs, a couple of Scout 800s, and a few more modern cars.
As we expected, some of the trucks were in rougher shape than others. Working carefully, we got into as many of the trucks as we could, shooting video and collecting VIN numbers to trace the titles and ownership. Apparently much of the paperwork is missing, though they were stored in the house at one time.
Several of the pickups and one of the Travelalls are in very good shape and would be restoration candidates for the right person. One of the Scout 800s might make a good restoration candidate, while both Scout IIs are only good for parts. It would be very tempting to offer the family money for one of those pickups.
Then we spent an hour bushwhacking through the forest to try to find a shed that was allegedly full of parts. We walked all the way across the property and all the way back to a creek at the rear boundary without finding anything. Consulting Bing maps, I found an outline of where a shed once stood in Street view and oriented us to where it should be. We discovered it collapsed under a tangle of vines and overgrowth and realized we had walked past it twice without seeing it. Under the broken beams we found another collection of parts: some Scout doors, some R-series doors, assorted sheet metal, as well as a bunch of Scout hubcaps and some other interior parts. In order to do a full survey, someone would have to return with a chainsaw and a bushhog to get in there. We collected the best parts we could reach, carried them back to the main truck collection, and then made our way out of the field before it started to rain. Exhausted after a four hour expedition, we stopped at the local diner and loaded up on breakfast.
Bennett got to thinking about how he might swing a deal for the Traveler, and we threw some ideas back and forth. It’s an extremely worthy candidate for saving, and miles ahead of Hanky’s condition.
On Sunday morning, one of those old hands came through for me again. My Scout has been at the transmission shop waiting on a callback from IH Parts America as to the clutch issue; this being the height of show season and Nats being next week I figure they are pretty busy planning and packing the trucks, so I haven’t heard anything back from them. Beginning to panic, I put a post up on the Binder Planet asking for help diagnosing the issue and within two hours I had an answer: one of the bolts is installed backwards and needs to be flipped around. This will require dropping the transmission again, but if that’s all it’s going to take, I’m glad it’s at a transmission shop. Hopefully they can get me in and out ASAP this week so I can get her prepped for the road.
Finally, a nice fellow from Instagram had reached out asking me for some advice on a C-Series pick up truck he bought locally. After trading some messages back and forth it turned out he was only about 20 minutes from the house, so I offered to stop down on Sunday morning to look over his truck.
The pickup in question was one I’d looked at back in 2022 when I was first searching for a new project vehicle. I met him in his driveway, where he was replacing the Holley 1940 carb on a six-cylinder engine. After meeting his dog and shaking his hand, he explained that the carb that came with the truck was leaky and had a lot of play in the butterfly valves. He’d rebuilt it, but water had gotten into the gas tank and rusted out parts of the carb.
He was looking at using a Chinese-built replacement, but the linkage on that carb was set up for a Ford so there would need to be a lot of re-engineering the throttle linkage to get it to work with his truck. So we futzed with the old carb, trying to find a gasket that would hold the gas in the bowl, but the two that he had didn’t work and it kept dumping gas when he ran the fuel pump. While we worked, I answered questions and passed on advice on what to prioritize and how I’ve done certain things on my truck. He’s facing the same issues I had with my Travelall: the cowl vents are leaking into the cab and need to be cut out and replaced, requiring major sheetmetal surgery. He doesn’t have any experience with bodywork or welding yet, and picked my brain about how to tackle the project. I explained the process I had followed and gave him advice on where to look for parts and how to disassemble certain things. We weren’t able to get the carb to work properly, so I told him I would look out for replacements at Nats.
I realize now that I am the old-timer. The brutal truth is that my peers and I are the graybeards, and we’re slowly passing on and leaving our stuff behind. I’m not a professional, and I still need to learn so much, but it feels good to give back to the community as much as I’ve learned from it, and to be an ambassador for the brand and for the hobby.