I did some minor fooling around with the Scout today while the weather was warm. One of the easiest things to accomplish was swapping out the windshield wipers. I used ANCO 5913’s, which come with a bolt and nut ready for mounting (Thanks, Mike Moore!). All I had to do was pull the old blades and grind the rivet off with a multifunction saw, and bolt the new blades on. Make sure your kits have the nut included; one of mine didn’t. I had to use a 1/2″ 14/40 bolt and a locknut from my bench stock to hook up the second blade.
Then I pulled the dash bezel off to try and get the radio working again (turned out it was the ground wire, which we had disconnected when we were diagnosing the fuel sender issue back in the fall). Wile I was in there I pulled both purple-painted light bars out and replaced them with clean spares.Then I tried getting the speedo out to replace some bulbs, but couldn’t get it to come through the dash cutout, so I gave it up and put everything back.